How to know do you have to restoration wood flooring

 

How often you recoat or repair your floor will depend on several factors including the type of floor it is, its finish and the wear its experienced. However, as a basic preventative, you might consider recoating your floor every two or three years. Don’t wait until your floor looks worn. If you allow the protective coat to wear away, it becomes susceptible to dirt and water penetration and harder to clean and repair.

A good way to check whether your floor needs treatment is to pour a few drops of water onto its surface. If the finish is in good order, the water will bead on the floor and can easily be wiped way. No maintenance is needed. If the water slowly soaks into the timber, leaving behind a light saturation mark, the finish is starting to wear thin. A new coat of lacquer or oil should be applied. However, if the water is immediately absorbed and leaves a dark stain, the finish has been completely worn away and the floor may need sanding and recoating.board-replace

Never Do To A Wood Floor…

10 Things To Never Do To A Wood Floor
1.Do not use abrasives or harsh chemicals to clean your floor
2.Do not use hard casters on any furniture directly on your hardwood floor
3.Do not use steam mops on your hardwood floor
4.Do not pour cleaning product directly on floor
5.Do not wait too long between refinish projects
6.Do not wear high heel shoes on wood floors
7.Do not leave the legs of your furniture unprotected
8.Do not drag furniture or heavy appliances over your hardwood floors
9.Do not let your dog’s nails remain untrimmed
10.Do not allow any stains remain untreated !

shutterstock_553833259.jpg

TOP 10 HARDEST WOODS

TOP 10 HARDEST WOODS
1. Quebracho – From the Spanish “quebrar hacha,” which literally means
“axe breaker.” Aptly named, wood in the Schinopsis genus is among the
heaviest and hardest in the world.
2. Lignum Vitae -Widely accepted as the hardest wood in the world–this
wood has been listed as an endangered species and is listed in CITES.
Consider Verawood as a very close substitute.
3. Gidgee – This Australian endemic is both very heavy and very strong.
Some pieces are dark enough to be used as an ebony substitute: one that’s
even harder than the original article.
4. Snakewood – It’s easy to see what makes Snakewood so unique–its patterns
and markings resemble the skin of a snake. Limited supply and high demand
make this one of the most expensive woods on eart.
5. Verawood – Sometimes called Argentine Lignum Vitae, this wood is a gem:
inexpensive, great olive-green color, beautiful feathery grain pattern, and
it takes a great natural polish on the lathe.
6. Camelthorn – Formerly classified as a member of the Acacia genus, this
south African hardwood is a tough customer. The wood is stubbornly hard,
and the tree is protected by giant sharp thorns.
7. African Blackwood – In some parts of the world, this wood has achieved
an almost legendary status. Historical evidence points to this wood
(rather than Diospyros spp.) being the original “ebony.”
8. Black Ironwood – Pieces are very seldom seen for sale, as this tree is
too small to produce commercially viable lumber. Like the unrelated
Desert Ironwood, Black Ironwood is an excellent choice for small
turning projects.
9. Katalox / Wamara – Some pieces can be just about a dark as true ebony,
while others are a more reddish brown with black streaks. So much depth
in the Swartzia genus, there’s something for everyone!
10. Cebil- Also known as Curupay or by the exaggerated name Patagonian
Rosewood, Cebil is not a true rosewood. It has a highly variable streaked
appearance not too unlike Goncalo Alves.
RSC5031_2_.jpg

SOFTWOODS top 3

SOFTWOODS top 3 :

PINE: Pine is a softwood which grows in most areas of the Northern Hemisphere. There are more than 100 species worldwide.

Properties: Pine is a soft, white or pale yellow wood which is light weight, straight grained and lacks figure.It resists shrinking and swelling. Knotty pine is often used for decorative effect.
Uses: Pine is often used for country or provincial furniture. Pickled, whitened, painted and oil finishes are often used on this wood.

ASH: There are 16 species of ash which grow in the eastern United States. Of these, the white ash is the largest and most commercially important.

Properties: Ash is a hard, heavy, ring porous hardwood. It has a prominent grain that resembles oak, and a white to light brown colour. Ash can be differentiated from hickory (pecan) which it also resembles, by white dots in the darker summer wood which can be seen with the naked eye. Ash burls have a twisted, interwoven figure.
Uses: Ash is widely used for structural frames and steam bent furniture pieces. It is often less expensive than comparable hardwoods.

HICKORY: There are 15 species of hickory in the eastern United States, eight of which are commercially important.

Properties: Hickory is one of the heaviest and hardest woods available. Pecan is a species of hickory sometimes used in furniture. It has a close grain without much figure.
Uses: Wood from the hickory is used for structural parts, especially where strength and thinness are required. Decorative hickory veneers are also commonly used.

188467_561366717211754_1381186184_n.jpg

The Best Ways to Clean Hardwood Floors

The Best Ways to Clean Hardwood Floors

-Prep your floor for cleaning by sweeping or dust-mopping to get rid of large particles of dirt and debris.
-Use a pH neutral cleaner that will be gentle on your hardwood floors.
-Use a fine spray mist to clean your floor in sections. Avoid putting too much liquid on your floors.
-Use a microfiber mop to clean. Traditional mops can work, but they can leave excess water on your floors.
-Skip using white vinegar and water to clean your floors. Using a specially formulated hardwood floor care cleaner is a smart way to maintain the beauty and look of your floors.

RSABC1401_1A.jpg

How it works

How it works:

We can give you a estimate over the phone or via email if you have the dimensions, as We work on a rate per sq meter or sq yard the estimate will allow for minor repairs,sanding and finishing with three coats of varnish.
If the price quoted seems reasonable, We will then visit your home to look at the floor and discuss your thoughts, concerns and ideas for the project.
We will then send you a written estimate or email you an estimate for the work.
If you would like to go ahead We will give you a date on which We will hope to start your room. We do not charge for my estimates or advice.

If you have a floor in need of some care and attention, please contact us for a no-obligation quote.

1545066_495538927234305_615667414_n.jpg